Luchs Welding Supplies

Luchs 410 NiMo Stainless Steel MIG Welding Wire, 0.80 mm, 12.5 kg

₺ 6.351,26 +KDV

Marka
: Luchs Welding Supplies
Kategori
: Welding Consumables
Stok Kodu
: luchs410nimo080
Favorilerime Ekle
Ürünü Paylaş
Ürün Açıklaması Ürün Yorumları

This is a high-performance, basic-coated stainless steel electrode for joining and filler welding of ferritic-martensitic stainless steels containing 12–14% Cr and 3–4% Ni, heat-resistant stainless steels, and cast steels of this type. The weld metal is martensitic stainless steel. It is used in hydroelectric power plants, turbine blades, components operating in water, steam, and seawater environments, continuous casting rolls, and cavitation-resistant hard-facing applications. It is used with direct current (DC+). For parts thicker than 10 mm, preheating to up to 150°C before welding is recommended, followed by tempering or normalizing plus tempering after welding. It is recommended to apply a buffer layer using a 312 or 307 electrode, particularly in joint welds.

Typical Chemical Properties of the Weld Metal
Analysis Type C Si Mn Cr Ni Mo
Welding Metal 0.06 0.40 0.80 12.00 4.00 0.50
Typical Mechanical Properties of the Base Metal (%)
Test Method Tensile Strength (N/mm²) Elongation A5 (%) Hardness (HB) Hardness HRC Notched Impact Strength ISO-V (J)
Post-Weld 850 17 410 44 20°C → 47

 

Henüz yorum yok.

Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*

Benzer Ürünler

Destek & Hızlı İletişim

Avrupa'da eğitim hayalinize giden yolda size yardımcı olmamızı ister misiniz?

Ahmet KARAKAYA

Müşteri Temsilciniz

0545 441 53 23