Magmaweld MPM 500 Y Welding Generator
₺ 1.074.251,75 +KDV
- It is powered by a water-cooled diesel engine and, in addition to its built-in welding function, provides 400 V/50 Hz (3-phase) and 230 V/50 Hz (3-phase) auxiliary outputs for external use.
- In addition to successful welding with rutile, basic, and cellulose-coated electrodes, it offers Lift-TIG and carbon arc cutting capabilities. With the optional wire feeder unit, it enables MIG/MAG welding.
- The welding current can be adjusted via the potentiometer on the front panel and a remote control box with a 20-meter cable.
- Indicators for current, voltage, fuel level, and operating time are located on the front panel.
- It is specifically designed for outdoor use and has an IP23S protection rating. There is no loss of performance with long welding cables.
- Compatible with a specially designed wheeled trailer (optional).
- It operates with a 12-volt internal battery and automatically switches to idle when there is no load.
- It features warnings for low fuel level, low oil pressure, and battery charging failure. It is equipped with ground fault and overheating protection.
- Electrode and ground clamps are included as standard.
| Engine | ||||
| Type | Yanmar 4TNV88 | |||
| Power | 24.1 | HP | ||
| Total Cylinder Displacement | 2,190 | cm³ | ||
| Number of Cylinders | 4 | |||
| Cooling System | WATER | |||
| Operating Type | ELECTRIC | |||
| Fuel | DIESEL | |||
| Fuel Consumption | 3.5 (75%) | L/hr | ||
| Fuel Tank Capacity | 70 | L | ||
| Dimensions (L x W x H) | 1620 x 750 x 1290 | mm | ||
| Weight (Net) | 715 | kg | ||
| Generator | ||||
| Maximum Power (1-Phase) | 5.5 kVA – 230 VAC | |||
| Maximum Power (3-Phase) | 16 kVA – 400 VAC | |||
| Power Factor | 0.80 | |||
| DC Source Circuit | ||||
| Rated Welding Current | 500 A – 30 VDC (40%) | A | ||
| Welding Current Adjustment Range | 30–500 | A | ||
| Open-Circuit Voltage | 70 | V | ||
| Electrode Diameter | 2.00–6.00 | mm | ||
| Carbon Cutting Electrode | 8 | mm | ||
Benzer Ürünler
Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*