High-alloy steels, hot-work steels, self-hardening steels,
high-manganese steels, and nickel alloys are used in hard-facing welding.
The resulting filler metal contains a high percentage of "Co" (cobalt) and exhibits excellent resistance to thermal shock up to 800°C, as well as to corrosion, oxidation, and metal-to-metal friction under pressure. The filler metal retains its hardness even at high
operating temperatures. Its high resistance to cavitation wear is another important feature.
The marine and steel industries are the sectors where Kobatek STL 12 is most extensively used.
It is beneficial to use Kobatek 382 or AS P-310R as a buffer.
Hardness: 48–52 HRC (+20°C)
38–40 HRC (+600°C)
– Hot-cutting blades
– Pump shafts operating at high temperatures
– Plastic extrusion screws
– Hot forging and burr-removal dies
– Paper and cardboard cutting blades
– Steam and chemical valve seats
– Ingot (hot billet) holding tips
– Saws used in the wood and lumber industry (by breaking the electrode coating)
– Extrusion dies
It is recommended to work in two or more passes. In single-pass applications, due to the dilution that occurs between the base metal and the weld metal, there may be a decrease in hardness and corrosion resistance. During welding,
excessive electrode oscillation should be avoided, and thick-section parts in particular should be preheated to 300°C before the welding process. After the welding process, the parts should be cooled slowly.
Benzer Ürünler
Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*