Elbor Welding Wires

Elbor ER 110 SG Low-Alloy MIG Welding Wire, 1.20 mm

₺ 5.550,38 +KDV

Marka
: Elbor Welding Wires
Kategori
: Welding Consumables
Stok Kodu
: elb11012
Favorilerime Ekle
Ürünü Paylaş
Ürün Açıklaması Ürün Yorumları
Standards
TS EN ISO 16834-A G 69 4 M21 Mn3Ni1 CrMo
EN ISO 16834-A G 69 4 M21 Mn3Ni1 CrMo
AWS A5.28 ER 110S-G
 

 

Chemical Composition of Welding Wire % (Typical)
C 0.09
Cr 0.30
Mn 1.70
Si 0.75
Ni 2.00
Cu 0.20
Mo 0.50
Weldable Material Classes
  • High-strength structural steels and fine-grained steels.
  • S690Q, L690M, N-A-XTRA 70, USS-T1, BH 70 V, HY 100, ASTM A514 Grade F
Mechanical Properties
Yield Strength (N/mm²) Tensile Strength (N/mm²) Notched Impact Strength (ISO-V/-30°C) Elongation (Lo=5do) (%)
min. 690 min. 760 min. 47 J 19
Applications and Properties
  • GeKa ER 110 SG is a MIG welding wire used for welding high-strength, fine-grained structural steels with a minimum yield strength of 690 N/mm²
  • Due to the presence of micro-alloying elements in its structure, it exhibits high mechanical strength as well as crack resistance and high ductility
  • It is used specifically for joining Hardox and Weldox plates.
  • Other general applications include boilers, pressure vessels, pipelines, structural steels, and fine-grained structural steels
  • It exhibits high impact resistance and toughness at low temperatures.
  • Preheating may be required depending on the carbon equivalent of the base material. For MAG welding, a mixture of Ar and 15–25% CO₂ can be used as the shielding gas; for TIG welding, Ar gas can be used.
Henüz yorum yok.

Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*

Benzer Ürünler

Destek & Hızlı İletişim

Avrupa'da eğitim hayalinize giden yolda size yardımcı olmamızı ister misiniz?

Ahmet KARAKAYA

Müşteri Temsilciniz

0545 441 53 23