Ürün Açıklaması
Ürün Yorumları
This TIG welding wire produces an austenitic-ferritic stainless steel weld metal and is used for welding different types of steel and for applying buffer layers on ferritic steels. Due to its high crack resistance and toughness, it is suitable for welding steels with low weldability and for applying stress-relief interlayers on parts prone to cracking. The weld metal is resistant to spatter up to 1100°C. It is used specifically for crack repair and filling of hard-to-weld tool and die steels, gear repair, applying buffer layers to cutting blades, and removing broken bolts. It is also suitable for welding galvanized sheet metal and profiles.
Standards
| AWS/ASME SFA – 5.9 | ER312 |
| EN ISO 14343 – A | W 29 9 |
| TS EN ISO 14343 – A | W 29 9 |
Typical Chemical Properties of Welding Wire
| Analysis Type | C | Si | Mn | Cr | Ni |
|---|---|---|---|---|---|
| Welding Wire | 0.10 | 0.40 | 1.80 | 30.00 | 9.00 |
Typical Mechanical Properties of the Base Metal (%)
| Test Method | Shielding Gas | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation A5 (%) | Notched Impact Strength ISO-V (J) |
|---|---|---|---|---|---|
| Post-Weld | I1 | 700 | 770 | 21 | 20°C → 60 |
Benzer Ürünler
Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*