Ürün Açıklaması
Ürün Yorumları
Applications and Characteristics
- This is a welding rod used for TIG welding of Cu90-Ni10 and lower-alloyed CuNi materials.
- It is also suitable for welding CuZn alloys resistant to seawater corrosion, as well as unalloyed and low-alloy steels and cast iron.
- The GeKa CuNiFe SG welding rod is recommended for the shipbuilding industry, offshore applications, and seawater desalination plants, particularly due to its very high resistance to seawater corrosion; it is also used in the chemical and food industries.
- Shielding gas (TIG): Argon
Standards
| TS EN ISO 24373 | S Cu 7061(CuNi1O) |
|---|---|
| EN ISO 24373 | S Cu 7061 (CuNi1O) |
| DIN 1733 | SG-CuNi10 Fe |
Chemical Composition of Welding Wire % (Typical)
| Cu | Balance |
|---|---|
| Mn | 1.00 |
| Ni | 10.00 |
| Ti | 0.17 |
| Fe | 1.80 |
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation (Lo=5do) (%) | Hardness (Post-Weld) (HB) |
|---|---|---|---|
| 150 | 350 | 30 | 200 |
Benzer Ürünler
Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*