Ürün Açıklaması
Ürün Yorumları
Thanks to the low levels of phosphorus and silicon present in this alloy, which contains 98% copper, it is possible to obtain a weld metal that is non-porous and has high electrical
conductivity. After welding, the weld metal is a color close to that of pure copper. It is used for welding oxygen-free copper, electrolytic copper, and pure copper casting alloys.
It can be used for welding materials such as copper pipes, distillation tanks, or elbows. It is used to join copper to plain carbon steel or to coat the surfaces of steel materials.
conductivity. After welding, the weld metal is a color close to that of pure copper. It is used for welding oxygen-free copper, electrolytic copper, and pure copper casting alloys.
It can be used for welding materials such as copper pipes, distillation tanks, or elbows. It is used to join copper to plain carbon steel or to coat the surfaces of steel materials.
Classification and Chemical Analysis of the Welding Wire (Typical)
| AWS A5.7 |
: | ERCu |
| DIN 1733 | : | SG-CuSn |
| Sn | Si | Mn | Ni | Cu |
|
|
0.80 |
0.30 |
0.20 |
0.10 |
remaining |
|
Mechanical Properties of the Base Metal
| Yield Strength | : | 90–110 | (N/mm²) | ||
|---|---|---|---|---|---|
| Tensile Strength | : | 210–230 | (N/mm²) | ||
| Elongation (L=5d) | : | 50–60 | (%) | ||
| Hardness |
: | 30–35 | (HB) |
Protective Gases (EN 439)
I1: 100% Ar
Applications and Welded Materials
| Pure Copper Materials (DIN 1787): |
| OF-Cu (2.0040), SE-Cu (2.0070), SW-Cu (2.0076), SF-Cu (2.0090) |
| Rolled Low-Alloy Copper Materials (DIN 17666): |
| CuFe2P (2.1310), CuSP (2.1498), CuTeP (2.1546) |
Benzer Ürünler
Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*