Magmaweld Welding Machines

Magmaweld MPM 15/400 IK Welding Generator

₺ 997.519,48 +KDV

Marka
: Magmaweld Welding Machines
Kategori
: Welding Generator
Stok Kodu
: magmampm15400ık
Favorilerime Ekle
Ürünü Paylaş
Ürün Açıklaması Ürün Yorumları
  • It is powered by a water-cooled diesel engine and, in addition to its built-in welding function, provides auxiliary outputs of 400 V/50 Hz (3-phase), 230 V/50 Hz (3-phase), and 48 V/50 Hz (single-phase) for external use.
  • In addition to successful welding with rutile, basic, and cellulose-coated electrodes, it offers Lift-TIG and carbon arc cutting capabilities. With the optional wire feeder unit, it enables MIG/MAG welding.
  • The welding current can be adjusted via the potentiometer on the front panel and a remote control box with a 20-meter cable.
  • Indicators for current, voltage, fuel level, and operating time are located on the front panel.
  • It is specifically designed for outdoor use and has an IP23S protection rating. There is no loss of performance with long welding cables. It is compatible with a specially designed wheeled trailer. (Standard for the MPM 15/400 I-CL; optional for other models)
  • It operates with a 12-volt internal battery and automatically switches to idle when there is no load.
  • It features warnings for low fuel level, low oil pressure, and battery charging failure. It is equipped with ground fault and overheating protection.
  • Electrode and ground clamps, as well as a remote control, are included as standard.
  •  

  • Motor
    Type KUBOTA D1105-E
    Power 28 HP
    Total Cylinder Displacement 1123 cm³
    Number of Cylinders 3
    Cooling System WATER
    Operating Type ELECTRIC
    Fuel DIESEL
    Fuel Consumption 4.9 (75%) lt/hr
    Fuel Tank Capacity 38 L
    Dimensions (L x W x H) 1590 x 730 x 920 mm
    Weight (Net) 450 kg
    Generator
    Type GenSet Asynchronous Brushless
    Maximum Power (1-Phase) 10 kVA – 230 VAC
    Maximum Power (3-Phase) 15 kVA – 400 VAC
    Power Factor 0.80
    DC Source Circuit
    Rated Source Current 370 A – 35 VDC (35%)
    Rated Source Current 350 A – 34 VDC (60%)
    Welding Current Adjustment Range 30–400 A
    Open-Circuit Voltage 70 V
    Electrode Diameter 2.00–6.00 mm
    Maximum Carbon Cutting Electrode 6 mm

     

Henüz yorum yok.

Yorum yapabilmek için giriş yapmış ve ürünü satın almış olmanız gerekmektedir.*

Benzer Ürünler

Destek & Hızlı İletişim

Avrupa'da eğitim hayalinize giden yolda size yardımcı olmamızı ister misiniz?

Ahmet KARAKAYA

Müşteri Temsilciniz

0545 441 53 23